Cold Work
S1 Tool Steel 1.2550
Category: Cold Work
BS/EN: S1
DIN: 1.2550
AISI: 60WCrV8
DB: HIDALGO 1
Call us on 01709 377005 or
- 15.5
- 20
- 26
- 30
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 70
- 80
- 100
- 110
- 121
- 130
- 150
S1 TOOL STEEL SUPPLIERS
S1 is an impact-resisting, oil-hardening tool steel for cold work and hot work applications.
Supplied Condition:
We supply S1 rounds in the soft annealed condition to max. 229 HB.
Why choose AKM Steels for S1 tool steel?
The right grade for the job — S1 is very tough and resists impact, so it is used for heavy-duty punches, cold shear knives, and pneumatic hammers and chisels. Tell us your application and we will confirm it is suitable.
A wide choice of sizes — S1 is available in rounds from 15.5mm to 150mm diameter. It is supplied soft annealed, with a maximum hardness of 229 HB. Other sizes are available on request.
Cut to size — We can cut or machine S1 into pieces ready to be made into punches and ejector pins.
Specify with confidence — Independent testing and inspection is available if your tools face heavy shock loads and you want proof of quality.
Chemical Composition (%):
| C | Cr | W | V |
| 0,60 | 1,00 | 2,00 | 0,15 |
-
S1 Tool Steel Properties
- Very good toughness
- Dimensionally stable
- High and deep hardening capacity, allowing many regrinds
- Used where high resistance to impact & cross stresses is required i.e. the majority of battering & shock tools
S1 Tool Steel Applications
- Cold shear knives
- Paper & wood cutting knives
- Cutting tools for plates up to 10mm
- Ejector pins
- Heavy duty punches
- Coining tools
- Pneumatic hammers & chisels
S1 TOOL STEEL SUPPLIERS
S1 is an impact-resisting, oil-hardening tool steel for cold work and hot work applications.
Supplied Condition:
We supply S1 rounds in the soft annealed condition to max. 229 HB.
Why choose AKM Steels for S1 tool steel?
The right grade for the job — S1 is very tough and resists impact, so it is used for heavy-duty punches, cold shear knives, and pneumatic hammers and chisels. Tell us your application and we will confirm it is suitable.
A wide choice of sizes — S1 is available in rounds from 15.5mm to 150mm diameter. It is supplied soft annealed, with a maximum hardness of 229 HB. Other sizes are available on request.
Cut to size — We can cut or machine S1 into pieces ready to be made into punches and ejector pins.
Specify with confidence — Independent testing and inspection is available if your tools face heavy shock loads and you want proof of quality.
Chemical Composition (%):
| C | Cr | W | V |
| 0,60 | 1,00 | 2,00 | 0,15 |
-
S1 Tool Steel Properties
- Very good toughness
- Dimensionally stable
- High and deep hardening capacity, allowing many regrinds
- Used where high resistance to impact & cross stresses is required i.e. the majority of battering & shock tools
S1 Tool Steel Applications
- Cold shear knives
- Paper & wood cutting knives
- Cutting tools for plates up to 10mm
- Ejector pins
- Heavy duty punches
- Coining tools
- Pneumatic hammers & chisels
FAQs
Get A Quote Today
Can't find what you're looking for? Get in touch with the team today!