| Width | Thickness | ||||||
|---|---|---|---|---|---|---|---|
| 20 | 30 | 40 | 70 | 90 | 130 | 350 | |
| 505 | x | x | |||||
| 530 | x | ||||||
| 600 | x | ||||||
| 610 | x | x | x | ||||
- 505 x 20
- 505 x 90
- 530 x 70
- 600 x 350
- 610 x 30
- 610 x 40
- 610 x 130
- 30
- 31
- 35
- 36
- 40
- 41
- 46
- 50
- 51
- 56
- 61
- 66
- 71
- 76
- 81
- 86
- 91
- 102
- 112
- 122
- 132
- 142
- 152
- 162
- 172
- 182
- 192
- 202
- 212
- 222
- 262
- 282
- 303
A2 TOOL STEEL SUPPLIERS
A2 is a general-purpose tool steel, used for tools for shaping materials e.g. metal & wood.
This grade has medium wear resistance, better than O1, but less than D2 or D3
Supplied Condition:
We supply A2 in the soft annealed condition to max. 241 HB.
We bandsaw cut rounds, wide plates and flats to your requirements.
Why choose AKM Steels for A2 tool steel?
Help choosing between grades — A2 offers better wear resistance than O1 but less than D2, with good toughness after heat treatment. Tell us your application and we will recommend the right grade.
Supplied in the right condition — A2 is supplied soft annealed with a maximum hardness of 241 HB, in rounds from 30mm to 303mm plus wide flats and plates. Other sizes are available on request.
Machined to your needs — A2 is easy to machine and grind. We can also saw it to size, reducing the preparation work on your side.
Independent testing available — We can arrange independent testing and inspection, so you can verify the steel’s quality beforehand.
A2 Tool Steel Chemical Composition (%):
| C | Cr | Mo | V |
| 1,00 | 5,30 | 1,10 | 0,25 |
-
A2 Tool Steel Properties
- Medium alloyed, air hardening steel (1% C, 5% Cr)
- High achievable hardness
- Good dimensional stability
- Excellent compressive strength
- Good toughness after heat treatment
- Intermediate wear resistance, easier to machine and grind
Typical Applications for A2
Suitable for applications which require good wear resistance:
- Shear blades
- Cutting, punching, stamping
- Bending tools
- Form rolls
- Cold pilger mandrels
- Mould for plastic processing
- Embossing and stamping dies
Soft Annealing
| Temperature | Cooling | Hardness |
| 800 - 840°C | furnace | max. 241 HB |
Stress Relief Annealing
| Temperature | Cooling |
| 600 - 650°C | furnace |
Hardening
| Temperature | Cooling | Tempering |
| 950 - 980°C | oil, pressure gas (N²), air or hot bath 500 - 550°C | See PDF for diagram |
A2 TOOL STEEL SUPPLIERS
A2 is a general-purpose tool steel, used for tools for shaping materials e.g. metal & wood.
This grade has medium wear resistance, better than O1, but less than D2 or D3
Supplied Condition:
We supply A2 in the soft annealed condition to max. 241 HB.
We bandsaw cut rounds, wide plates and flats to your requirements.
Why choose AKM Steels for A2 tool steel?
Help choosing between grades — A2 offers better wear resistance than O1 but less than D2, with good toughness after heat treatment. Tell us your application and we will recommend the right grade.
Supplied in the right condition — A2 is supplied soft annealed with a maximum hardness of 241 HB, in rounds from 30mm to 303mm plus wide flats and plates. Other sizes are available on request.
Machined to your needs — A2 is easy to machine and grind. We can also saw it to size, reducing the preparation work on your side.
Independent testing available — We can arrange independent testing and inspection, so you can verify the steel’s quality beforehand.
A2 Tool Steel Chemical Composition (%):
| C | Cr | Mo | V |
| 1,00 | 5,30 | 1,10 | 0,25 |
-
A2 Tool Steel Properties
- Medium alloyed, air hardening steel (1% C, 5% Cr)
- High achievable hardness
- Good dimensional stability
- Excellent compressive strength
- Good toughness after heat treatment
- Intermediate wear resistance, easier to machine and grind
Typical Applications for A2
Suitable for applications which require good wear resistance:
- Shear blades
- Cutting, punching, stamping
- Bending tools
- Form rolls
- Cold pilger mandrels
- Mould for plastic processing
- Embossing and stamping dies
Soft Annealing
| Temperature | Cooling | Hardness |
| 800 - 840°C | furnace | max. 241 HB |
Stress Relief Annealing
| Temperature | Cooling |
| 600 - 650°C | furnace |
Hardening
| Temperature | Cooling | Tempering |
| 950 - 980°C | oil, pressure gas (N²), air or hot bath 500 - 550°C | See PDF for diagram |
FAQs
Get A Quote Today
Can't find what you're looking for? Get in touch with the team today!