- 41
- 46
- 56
- 61
- 66
- 71
- 76
- 81
- 82
- 86
- 91
- 101
- 102
- 106
- 111
- 112
- 116
- 122
- 132
- 143
- 153
- 172
- 173
- 183
- 193
- 203
- 223
- 253
- 263
- 273
- 283
- 373
D6 TOOL STEEL SUPPLIERS
D6 has excellent wear resistance and medium toughness.
Supplied Condition:
We supply D6 rounds in the soft annealed condition to max. 250 HB.
Why choose AKM Steels for D6 tool steel?
A wide choice of sizes — D6 comes in round bar from 41mm to 373mm diameter, supplied soft annealed with a maximum hardness of 250 HB. Other sizes are available on request.
Expert grade advice — D6 offers excellent wear resistance but only medium toughness. If your tooling needs greater toughness, we will recommend a more suitable grade.
Ready to use — We can turn, bore or precision grind D6 rounds close to your finished size, reducing machining time on your side.
Specify with confidence — Independent testing and inspection is available if you need proof the steel meets your requirements.
Chemical Composition (%):
| C | CR | W |
| 2,10 | 12,00 | 0,80 |
- Air-hardening
- Abundance of hard carbides (C, Cr) → Excellent wear resistance & medium toughness
- High surface hardness after heat treatment
- Good edge holding qualities & dimensional stability
- High compressive strength
- Not secondary hardenable
- Cutting and drawing tools requiring high wear resistance
- Rolls with high dimensional stability
- Deep drawing tools
- Forming tools
- Long-run press tools
- Tools for wire, bar and tube production
- Cold shear blades for thin sheets
- Moulds for abrasive plastics and ceramics.
D6 TOOL STEEL SUPPLIERS
D6 has excellent wear resistance and medium toughness.
Supplied Condition:
We supply D6 rounds in the soft annealed condition to max. 250 HB.
Why choose AKM Steels for D6 tool steel?
A wide choice of sizes — D6 comes in round bar from 41mm to 373mm diameter, supplied soft annealed with a maximum hardness of 250 HB. Other sizes are available on request.
Expert grade advice — D6 offers excellent wear resistance but only medium toughness. If your tooling needs greater toughness, we will recommend a more suitable grade.
Ready to use — We can turn, bore or precision grind D6 rounds close to your finished size, reducing machining time on your side.
Specify with confidence — Independent testing and inspection is available if you need proof the steel meets your requirements.
Chemical Composition (%):
| C | CR | W |
| 2,10 | 12,00 | 0,80 |
- Air-hardening
- Abundance of hard carbides (C, Cr) → Excellent wear resistance & medium toughness
- High surface hardness after heat treatment
- Good edge holding qualities & dimensional stability
- High compressive strength
- Not secondary hardenable
- Cutting and drawing tools requiring high wear resistance
- Rolls with high dimensional stability
- Deep drawing tools
- Forming tools
- Long-run press tools
- Tools for wire, bar and tube production
- Cold shear blades for thin sheets
- Moulds for abrasive plastics and ceramics.
Get A Quote Today
Can't find what you're looking for? Get in touch with the team today!